AS199/1and2...the first pictures!

Click on the image to see the gallery

AS199/2/first portrait session

Click on the image to see the gallery

AS199/1_2/developing session

Film developing

Ilford HP5 exposed at 400asa
Film developer Ilford Ilfosol II
Time developing 7 minutes at 20° 1 part of chemical solution +9 part water
STOP developer Acetic Acid (BE CAREFUL, it can be dangerous) 12cc for 500cc
Fixer Ilford Hypam 4 minutes al 20° 1 part of chemical solution +4 part water
Caculate chemical solution for 500 cc

Kodak Tmax400 exposed at 400asa
Film developer Ilford Ilfosol II
Time developing 7:30 minutes at 20° 1 part of chemical solution +9 part water
STOP developer Acetic Acid (BE CAREFUL, it can be dangerous) 12cc for 500cc
Fixer Ilford Hypam 4 minutes al 20° 1 part of chemical solution +4 part water
Caculate chemical solution for 500 cc

Pour developer into the tank
Film developer at 20° 1 part of chemical solution +9 part water
Tap on counter / shake vigorously (to remove air bubbles) Shake for 15/20 seconds

Wait for 30 seconds
(1 minute) Flip gently 2/3 times

Wait for 30 seconds
Flip gently 1 times
Wait for 30 seconds
(2 minutes) Flip gently 2/3 times

continue with this tank agitation until the 7nd minute

Pour STOP developer 12cc for 500cc
diluited into the tank
Tap on counter / shake vigorously
SHAKE FOR 30 SECONDS whitout upset the tank
Pour out chemical

Pour into the tank
Fixer Ilford Hypam 1 part of chemical solution +4 part water
SHAKE FOR 20/30 SECONDS

Wait for 20 seconds
Flip gently 3/4 times
Wait until the first minute
Do this every 30sec for 4 minutes
(extra 30 seconds for used chemical)

Pour out chemical (pinkish)

Place container under running water (room temperature)
Wait for 20 minutes
If you want to save water:
Rinse / shake for 30 seconds
Empty / refill
(5 times)

because the calcium in the water, before hanging, wash the negative in a solution of wetting agent (imbimbente)
1,5cc for 500cc

Hang to dry in a place without dust
Click on the image to see the gallery

For further informations...
http://www.flickr.com/photos/bloritsch/sets/72157594172543125/

AS199/2/09/11_Gianicolo

Click on the image to see the gallery

The galleries will be active in few days

AS199/2/09/10/08

Click on the image to see the gallery

AS199/1/09/8/08

Click on the image to see the gallery

AS199/2/09/4/08

Click on the image tosee the gallery

AS199/1/09/1/08

Click on the image to see the gallery

Take a look!

http://en.wikipedia.org/wiki/Camera

http://en.wikipedia.org/wiki/Photographic_lens

http://en.wikipedia.org/wiki/Light_meter

http://en.wikipedia.org/wiki/Shutter_%28photography%29

http://en.wikipedia.org/wiki/Single-lens_reflex_camera

http://en.wikipedia.org/wiki/Single-lens_reflex_camera

http://en.wikipedia.org/wiki/Depth_of_field

AS/199/2_Write the caption

AS/199/1_Write the caption

1: pull back cover release knob
2: take film
3: place film in left side of camera
4: place end of film strip into the slot so the little knobs on the gray thing line up with the holes in the film. advance film using the lever.
5: shut the door
6: spin the lever to wind the film
7: pull advance lever
8: adjust speed/ASA
Amanda